Design and Manufacture of Multifunctional nitrogen tank

Bossmen multifunctional nitrogen cabinet design and production

In the industrial manufacturing industry, proper storage of moisture-resistant objects is the most important basic work. Therefore, reliable dehumidification and good sealing design of storage cabinets can reduce the occurrence of defective rates. Humidity-controlled storage space is extremely important.

Bossmen is an expert in industrial humidity control and environmental monitoring. Our expertise can help you implement standard industrial specifications to improve yield and reduce manufacturing and management costs. The design and production of multi-functional nitrogen cabinets are completely designed and produced according to customer needs, to solve the problems of poor dehumidification efficiency of nitrogen cabinets, as well as energy and cost waste caused by nitrogen loss. Bossmen industrial humidity control cabinets can control different humidity. We are the most reliable storage partner in the industry, such as moisture-proof cabinets, non-steel cabinets with excellent static conductivity, gas cabinets that can be filled with nitrogen and other gases, and customized cabinets such as glove cabinets and instrument cabinets for various customers' special needs. .

Control the humidity below 5%RH, all grades of electronic parts can be stored for a long time, and can directly enter the reflow process, the humidity must be reduced to the original set point within 1 hour when opening and closing the door, and the humidity is too low. Electrostatic treatment . And the high temperature and dry environment will cause the problem of accelerated oxidation rate of electronic parts.

Bossmen rapid dehumidification series is designed in full compliance with international standards, not only the dehumidification reliability of normal temperature dehumidifiers, but also can fully improve productivity, solve the problem of defective rate and reduce costs. The rapid dehumidification series program design can stop dehumidification when the humidity set point is reached, which saves energy and can be directly upgraded with the existing nitrogen cabinet or moisture-proof cabinet in the factory.

Equipped with various types of non-steel nitrogen cabinets, it complies with international semiconductor drying and cleanliness standards. The humidity standard specification for semiconductor industry wafers and wafer storage states that wafers or chips should be stored in a nitrogen concentration of at least 99% or a dry air environment. The highest humidity should not exceed 30%RH, and the lowest should not exceed 7%RH (to prevent the electronic damage caused by extremely low humidity environment and no electrostatic treatment). In addition, the most important thing is that the storage environment does not generate dust. The Bossmen rapid dehumidification nitrogen control series fully conforms to the design of international standards. It not only has the reliability of dehumidification, but also the static elimination system can avoid dust generation and sticking.

The clean and dry air high-efficiency dehumidification system is the most important part storage environment standard in the electronics industry. The specification clearly points out various levels of electronic humidity sensitivity levels, as well as the corresponding conditions for various dehumidification methods and dehumidification speeds.
The key points include: at RH, all grades of electronic parts can be stored for a long time and can go directly to the reflow process, the humidity must drop back to the original set point within 1 hour when opening and closing the door, and the thirst is too low. deal with. And the high temperature and dry environment will cause the problem of accelerated oxidation rate of electronic parts.
Bossmen rapid dehumidification series are designed in full compliance with international standards, not only the dehumidification reliability of normal temperature dehumidifiers, but also fully improve productivity, solve the problem of defective rate and reduce costs. The rapid dehumidification series program design can stop dehumidification when the humidity set point is reached , save energy, and can be directly upgraded with the existing nitrogen cabinet or moisture-proof cabinet in the factory.

At present, many industrial products have their special requirements for extremely low humidity drying processing. The humidity requirements of similar industrial products are generally below 1% RH. Such humidity requirements are no longer available for general relative humidity control systems or display systems. Bossmen dew point control nuclear drying and dehumidification system is completely designed for this kind of special drying needs. It has fast and efficient dehumidification power. It can be used with various ultra-airtight design storage cabinets or processing glove cabinets. Its features include dew point temperature display. , electrostatic treatment of low humidity, and recording and alarm functions.


We can solve:

0